Teklif İsteyiniz
EM06-E LTE Cat-6 HAT for Raspberry Pi, Dual Antennas LTE-A, Multi Regi
Ürün Kodu : LTE-WS21706
4.139,90 TL + KDV
Stok Durumu:
Yok
Not
:
Aynı Gün Kargo
15’e kadar aynı gün kargo
Worldwide
Shipment
Next Day
Shipment
Kampanya
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
- Ürün Özellikleri
- İade ve Teslimat
- Ödeme Seçenekleri
- Yorumlar (0)
- Beni Ara
- Ek
-
EM06-E LTE CAT-6 HAT FOR RASPBERRY PI
Supports LTE-A and UMTS/HSPA(+) multi networks
Multi-Constellation High-Accuracy GNSS, Cloud Platform Communication, LTE-A Networking
Features At A GlanceThis is an LTE Cat 6 Raspberry Pi communication HAT with GNSS and up to 300Mbps (downlink) / 50Mbps (uplink) data rate. It is applicable for countries/regions including Europe, the Middle East, Africa, Asia-Pacific, Brazil... By connecting it to PC, Raspberry Pi or Jetson Nano host boards, it is easy to enable LTE-A high speed networking, cloud platform communication, SMS, and global GNSS positioning functions.
- Multi-constellation high-accuracy GNSS positioning: GPS, GLONASS, BeiDou/Compass, Galileo, QZSS
- Integrates extensive network protocols, with multi drivers and software support, compatible with different OS including Windows / Linux / Android
- USB 3.1 port (USB 2.0 compatible) for connecting to PC, Raspberry Pi, or Jetson Nano host board to enable high speed LTE-A communication
- Standard M.2 B KEY slot, compatible with different core modules: EM06-E, EM06-J, EM06-A series
- Onboard PWR and RST control pin, enabled via DIP switch, for connecting to external IO to turn on/off or reset the module
- Onboard USB-C connector, enabled via switch, for connecting standalone power supply for the module, allows more loads, stable amd flexible power supply
- Onboard power supply on/off switch, reset button and LED indicator, easy to turn on/off the module or monitor the operating status
- Reserved 4x SMA to IPEX antenna interfaces, with pre-soldered 2x connectors for easily using antennas, allows changing the SMA antenna position
- High efficiency power supply circuit, up to 3A output current
Module SpecificationsLTE CAT 6 Region / Provider EMEA / APAC (except Japan and CMCC) / Brazil Module dimensions 42.0 × 30.0 × 2.3 (mm) TEMPERATURE RANGE Operating temperature -30°C ~ +70°C Extension temperature -40°C ~ +85°C FREQUENCY BAND LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32 (receive only for B32) LTE-TDD B38, B40, B41 2xCA B1+B1, B5, B8, B20, B28;
B3+B3, B5, B7, B8, B20, B28;
B7+B5, B7, B8, B20, B28;
B20+B32 (B32 is used for aux component carrier only), B38+B38, B40+B40, B41+B41WCDMA B1, B3, B5, B8 GNSS GPS/GLONASS/BeiDou (Compass)/Galileo/QZSS DATA RATE LTE-FDD 300 Mbps (DL) / 50 Mbps (UL) LTE-TDD 226 Mbps (DL) / 28 Mbps (UL) DC-HSPA+ 42 Mbps (DL) / 5.76 Mbps (UL) WCDMA 384 Kbps (DL) / 384 Kbps (UL) Standard M.2 B KEY SlotCompatible With EM06-E, EM06-J, EM06-A Series Modules
LTE CAT 6 EM06-E EM06-J EM06-A Region / Provider EMEA/APAC①/Brazil Japan North America/Mexico Operating temperature -30 °C ~ +70 °C Extension temperature -40 °C ~ +85 °C Dimensions 42.0 × 30.0 × 2.3 (mm) Power supply 3.135V~4.4V, typical 3.7V Power consumption 50μA @ shutdown
4.1mA @ hibernate, typical
22.1mA @ idle47μA @ shutdown
3.8mA @ hibernate, typical
19.5mA @ idle50μA @ shutdown
3.8mA @ hibernate, typical
21.3mA @ idleFREQUENCY BAND LTE-FDD B1, B3, B5, B7, B8, B20, B28, B32② B1, B3, B8, B18, B19, B26, B28 B2, B4, B5, B7, B12, B13, B25, B26, B29②, B30, B66 LTE-TDD B38, B40, B41 B41 B41 2xCA B1+B1, B5, B8, B20, B28;
B3+B3, B5, B7, B8, B20, B28;
B7+B5, B7, B8, B20, B28;
B20+B32②; B38+B38; B40+B40; B41+B41B1+B1, B8, B18, B19, B26, B28;
B3+B3, B8, B18, B19, B26, B28;
B41+B41B2+B2, B5, B12, B13, B29②;
B4+B4, B5, B12, B13, B29②;
B7+B5, B7, B12, B26;
B25+B5, B12, B25, B26;
B30+B5, B12, B29②;
B66+B5, B12, B13, B29②, B66;
B41+B41WCDMA B1, B3, B5, B8 B1, B3, B6, B8, B19 B2, B4, B5 GNSS GPS / GLONAS S/ BeiDou (Compass) / Galileo / QZSS (configurable) DATA RATE LTE-FDD 300 Mbps (DL); 50 Mbps (UL) LTE-TDD 226 Mbps (DL); 28 Mbps (UL) DC-HSPA+ 42 Mbps (DL); 5.76 Mbps (UL) WCDMA 384 kbps (DL); 384 kbps (UL) ① except Japan and CMCC;
② B29/B32 is only used for receiving in LTE-FDD, while only for aux component carrier wave in 2×CA;Comes with EM06-E module by default, for other modules or hardware customization, feel free to contract us.More Possibilities
Outline Dimensions
