x
Teklif İsteyiniz
Paylaş:
Fiyat Alarmı
WAVESHARE

GNSS HAT for Raspberry Pi, Multi-constellation Receiver Support with M

Ürün Kodu : LTE-WS18233
Yorumlar
1.724,96 TL + KDV
Stok Durumu:
Yok
Teklif İsteyiniz Stoklara düşünce haber ver
Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • MAX-M8Q GNSS HAT

    GNSS Module Based On MAX-M8Q For Raspberry Pi

    Accurate & Fast Positioning With Minor Drifting, Low Power Consumption, Outstanding Ability For Anti-Spoofing & Anti-Jamming

    This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low power consumption, outstanding ability for anti-spoofing & anti-jamming, and so on.

    By simply attaching it onto the Pi, it is fairly easy to enable GNSS capability for your Raspberry Pi.

    Features At A Glance
    • Multi-constellation receiver support, concurrent reception of up to 3 types of GNSS satellite systems from GPS, Beidou, Galileo, and GLONASS, and still retains low power consumption
    • Augment systems support, including SBAS, QZSS, IMES, D-GPS, improving the positioning performance of service location
    • A-GNSS (Assisted GNSS) support, reducing the first positioning time when powered up, improving the acquisition sensitivity
    • Features -167dBm navigating sensitivity and outstanding ability for anti-spoofing & anti-jamming, supports geo-fencing
    • Supports U-Center, an easy way to config the module
    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
    • Onboard USB TO UART converter CP2102 for serial debugging
    • Breakouts the module's UART and I2C interface, for connecting with host boards like Arduino/STM32
    • Baudrate range: 4800~921600bps (9600bps by default)
    • Supports DDC (I2C compliant) interface: up to 400KHz (max)
    • Onboard battery holder, supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
    • 4x LEDs for indicating the module operating status
    • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
    Specifications
    GNSS SPECIFICATIONS
    MAX-M8Q GPS & GLONASS GPS GLONASS BeiDou Galileo
    Frequency band 72x u-blox M8 engine channels
    GPS L1C/A, SBAS L1C/A, QZSS L1C/A, QZSS L1 SAIF,
    GLONASS L1OF, BeiDou B1I, Galileo E1B/C
    Horizontal positioning accuracy 2.5m CEP 2.5m CEP 4.0m CEP 3.0m CEP -
    Max navigation update rate 10Hz 18Hz 18Hz 18Hz 18Hz
    Time-To-First-Fix Cold starts 26s 29s 30s 34s 45s
    Hot starts 1s 1s 1s 1s 1s
    Aided starts 2s 2s 2s 3s 7s
    Sensitivity Tracking and navigating -167 dBm -166 dBm -166 dBm -160 dBm -159 dBm
    Re-acquisition -160 dBm -160 dBm -156 dBm -157 dBm -153 dBm
    Cold starts -148 dBm -148 dBm -145 dBm -143 dBm -138 dBm
    Hot starts -157 dBm -157 dBm -156 dBm -155 dBm -151 dBm
    PPS accuracy RMS 30ns 30ns 30ns 30ns 30ns
    99% 60ns 60ns 60ns 60ns 60ns
    PPS frequency 0.25Hz…10MHz (configurable)
    Velocity accuracy 0.05m/s
    Heading accuracy 0.3 degree
    Operational limits Acceleration (max): 4g
    Altitude (max): 50000m
    Velocity (max): 500m/s
    OTHER SPECIFICATIONS
    Communication interface UART (4800~921600bps, 9600bps by default), I2C (max 400KHz)
    Update rate 1Hz (default), 18Hz (max)
    Protocol NMEA 0183 Version 4.0 (V2.1, V2.3 or V4.1 selectable), UBX, RTCM 2.3
    Power supply 5V
    Overall current <40mA@5V (Continue mode)
    Module current 23mA@3V (Continue mode, tracking status)
    Operating temperature -40℃ ~ 85℃
    Dimensions 65mm × 30.5mm
    Standard Raspberry Pi 40PIN GPIO

    Compatible With Raspberry Pi Series Boards, Jetson Nano

    Multi-Constellation Receiver Support

    Concurrent Reception Of Up To 3 Types Of GNSS Satellite Systems, And Still Retains Low Power Consumption

    Supports GPS, Beidou, Galileo, And GLONASS

    Augment Systems Support

    Augment System Is Aimed At Improving The Accuracy, Completeness, Reliability, And Availability Of Positioning And Navigation

    Supports Augment Systems Including SBAS, QZSS, IMES, D-GPS

    Geo-Fencing Support

    Features -167dBm Navigating Sensitivity, Outstanding Ability For Anti-Spoofing & Anti-Jamming

    Software U-Center Support

    An Easy Way To Config The Module

    Applications

    Ideal For Fleet Management, Asset Tracking, Security Systems, Industrial PDA, GIS App, Etc.


    1. MAX-M8Q module
    2. TXS0108EPWR voltage translator
    3. RT9193-33 power chip
    4. CP2102 USB TO UART converter
    5. Status indicators
      RXD/TXD: UART TX/RX indicator
      PPS: GPS status indicator
      PWR: power indicator
    6. Battery holder
      supports ML1220 rechargeable cell, for preserving ephemeris information and hot starts
    1. Raspberry Pi GPIO header
      for connecting with Raspberry Pi
    2. UART, I2C interface
      for connecting with other MCUs
    3. USB TO UART port
    4. GNSS antenna connector
    5. UART selection jumper
      A: control the MAX-M8Q through USB TO UART
      B: control the MAX-M8Q through Raspberry Pi
      C: access Raspberry Pi through USB TO UART


Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.