Aynı Gün Kargo
15’e kadar aynı gün kargo
Worldwide
Shipment
Next Day
Shipment
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
- Ürün Özellikleri
- İade ve Teslimat
- Ödeme Seçenekleri
- Yorumlar (0)
- Beni Ara
- Ek
-
INTRODUCTION
This waterproof temperature sensor kit use DS18B20 probe AS. It contains a probe with a resistor module. So it is easy to connect on the Arduino board.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino.
If you want to make a simple water purifier, we recommend buying together with Gravity: Analog TDS Sensor/Meter for Arduino.
Type Selection of Temperature Sensors 
Name Gravity: I2C Non-contact IR Temperature Sensor For Arduino Gravity: Analog LM35 Temperature Sensor For Arduino Gravity: Waterproof DS18B20 Sensor Kit Gravity: Analog High Temperature Sensor SKU SEN0226 DFR0023 KIT0021 DFR0024 SEN0198 Operating Voltage 3.3V/5V 3.3V/5V 3.0V~5.5V 3.3V~5V 3.3V~5.5V Operating Current 2.7μA 2.7μA <3μA <3μA 2.8μA Operating Temperature -40℃～85℃ -40℃～150℃ -55℃～125℃ -55℃～125℃ 30℃～350°C Range of temperature measurement 0℃～65℃ 0℃～100℃ -55℃～125℃ -55℃～125℃ -55℃～125℃ Precision of temperature measurement 0.01℃ 0.5℃ 0.5℃ 0.5℃ 0.5℃ Temperature deviation ±0.5℃ ±0.5℃ ±0.5°C ±0.5℃ ±0.5℃ Dimension 30*22(mm) 30*22(mm) 33*22(mm) 22*32(mm) 42*32*18(mm) Interface Gravity-I2C Gravity-analog Gravity-digital Gravity-digital Gravity-digital Data type Digit Digit Digit (unibus) Digit (unibus) analog Price $8.80 $4.50 $8.00 $4.00 $16.00 Brief introduction BMP280 Barometer sensor supports Arduino and can measure both temperature and atmospheric pressure.
It can be applied to enhance GPS navigation & coordinate with IMU sensor to realize indoor and outdoor navigation. Compared to the last generation BMP180 barometer sensor, it has a lower power consumption, higher resolution and higher sampling frequency.
Application: Enahnced GPS navigation (e.g. time-to-first-fix improvement, dead-reckoning, slope detection) Indoor navigation (floor detection, elevator detection) Outdoor navigation, leisure and sports applications Weather forecast Health care applications (e.g. spirometry) Vertical velocity indication (e.g. rise/sink speed)
$A Temperature Sensor can be used to detect ambient air temperature, the output voltage is proportional to temperature. It has good linearity and high sensitivity.
Application:Medical treatments Personal controls Industrial controls Aeronautics and astronautics.
Waterproof temperature sensor DS18B20 is widely used in many fields, such as soil temperature measurement, hot tank temperature control etc. It supports multipoint measurement.
Application:
Constant temperature control Industrial system Consumer electronics Thermistors Refrigerators Barns Tanks Telecommunication rooms Power communication rooms
Cables etc.
A Temperature Sensor can be used to detect ambient air temperature. It can be connect to three-wire in parallel to achieve multipoint temperature measurement.
Application: Constant temperature control Industrial system Consumer electronics Thermistors Refrigerators Barns Tanks Telecommunication rooms Power communication rooms Cables etc.
It used a PT100 resistance type high temperature probe to measure a temperature range between 30-350°C.
Application: Especially for high precision of temperature measurements. Medical treatments Motors Industrials Temperature counts Resistance counts
Name Gravity: i2C BMP280 Barometer Sensor Infrared Thermometer Module Gravity:SHT1x Humidity and Temperature Sensor DHT22 Temperature and Humidity Sensor SKU SEN0206 SEN0093 DFR0066 DFR0067 SEN0137 Operating Voltage 3.3V~5V 3V~5V 3.3V~5V 3.3V~5V +5V Operating Current 1.2mA 4mA~9mA 2μA 0.5mA~2.5mA 1.5mA Operating Temperature -40℃～125 ℃ -10℃~50℃ -40℃~128.8℃ 0℃～50℃ -20℃-80℃ Range of temperature measurement -70.01℃～382.19℃ -33℃～220℃