x
Paylaş:
Fiyat Alarmı
WAVESHARE

LTE Cat-1 HAT for Raspberry Pi, 3G / 2G / GNSS as well with SIM7600E

Ürün Kodu : LTE-WS17954
Yorumlar
2.932,43 TL + KDV
Stok Durumu:
Var (5 Adet)

Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • LTE CAT-1 HAT FOR RASPBERRY PI

    Enabling LTE Cat-1/3G/2G Communication & GNSS Positioning

    Based on SIM7600E

     

    Features At A Glance
    • Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
    • Supports GPS, BeiDou, Glonass, LBS base station positioning
    • Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
    • Onboard CP2102 USB to UART converter, for serial debugging
    • Breakout UART control pins, to connect with host boards like Arduino/STM32
    • SIM card slot, supports 1.8V/3V SIM card
    • TF card slot for storing data like files, messages, etc.
    • Onboard audio jack and audio decoder for making telephone call
    • 2x LED indicators, easy to monitor the working status
    • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper
    • Baudrate: 300bps ~ 4Mbps (default: 115200bps)
    • Autobauding baudrate: 9600bps ~ 115200bps
    • Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
    • Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
    Specifications
    LTE CAT-1/3G/2G
    LTE Cat-1 LTE-TDD: B38 / B40 / B41
    LTE-FDD: B1 / B3 / B5 / B7 / B8 / B20
    3G UMTS / HSPA +: B1 / B5 / B8
    2G GSM / GPRS / EDGE: 900 / 1800 MHz
    GNSS
    Receiver type 16-channel
    C/A Code
    Sensitivity -159 dBm (GPS) / -158 dBm (GLONASS) / -159dBm (BeiDou)
    Cold starts: -148 dBm
    Time-To-First-Fix (open air) Cold starts: <35s
    Hot starts: <1s
    SMS AND AUDIO
    SMS Supported types: MT, MO, CB, Text, PDU
    Storage: USIM card and ME (default)
    Audio feature Supports echo cancellation
    Supports noise reduction
    OTHER
    Power supply 5V
    Operating voltage 5V / 3.3V (configured via jumper)
    Operating temperature -30°C ~ 80°C
    Storage temperature -45°C ~ 90°C
    Dimensions 56.21mm × 65.15mm
    Standard Raspberry Pi 40PIN GPIO

    Compatible With Raspberry Pi Series Boards, Jetson Nano

    Dial-Up On Windows/Linux

    LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink) *
    3G (HSPA+): Up To 5.76Mbps (Uplink) / Up To 42Mbps (Downlink) *

    * stands for idealized data rate, the actual data rate depends on factors like network coverage, traffic congestion, base station condition, etc.

    Cloud Communication

    Supports Communication Protocols Including TCP/UDP/FTP/FTPS/HTTP/HTTPS

    GNSS Positioning

    Supports GPS, BeiDou, Glonass, LBS Base Station Positioning

    Telephone Call & SMS Support

    Making Telephone Call Or Sending SMS By AT Commands, With Onboard Audio Jack

    What's On Board


    1. SIM7600E
    2. CP2102 USB to UART converter
    3. NAU8810 audio decoder
    4. TXS0108EPWR voltage translator
      translates 3.3V/5V into 1.8V
    5. MP2128DT power chip
    6. MP1482 power chip
    7. Raspberry Pi GPIO header
    8. SIM7600 control interface
      for connecting with host boards like Arduino/STM32
    9. SIM card slot
      supports 1.8V/3V SIM card
    10. TF card slot
      for storing data like files, messages, etc.
    11. 3.5mm earphone/mic jack
      for audio actions like making telephone call
    12. USB interface
      for testing AT Commands, getting GPS positioning data, etc.
    13. USB TO UART interface
      for serial debugging, or login to Raspberry Pi
    1. MAIN antenna connector
    2. AUX antenna connector
    3. GNSS antenna connector
    4. Module power switch
    5. Network status indicator
    6. Power indicator
    7. Operating voltage selection jumper
      configured via 0Ω resistor jumper
      VCCIO - 3.3V: set operating voltage as 3.3V
      VCCIO - 5V: set operating voltage as 5V
    8. UART selection jumper
      A: access Raspberry Pi via USB to UART
      B: control the SIM7600 by Raspberry Pi
      C: control the SIM7600 via USB to UART
    9. PWR configuration jumper
      PWR - 3V3: auto startup on power-up (default)
      PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
      Flight mode configuration jumper
      NC by default, no flight mode control pin
      Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
    10. USB connector solder pads
    11. BOOT forced programming solder pads


Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.