NodeMCU-ESP-S3-12K-Kit, ESP32-S3 WiFi+Bluetooth5.0 Development Board,
Aynı Gün Kargo
15’e kadar aynı gün kargo
Worldwide
Shipment
Next Day
Shipment
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
- Ürün Özellikleri
- İade ve Teslimat
- Ödeme Seçenekleri
- Yorumlar (0)
- Beni Ara
- Ek
-
Overview
This is an entry-level development board based on Espressif ESP32-S3 SoC, which is is equipped with Xtensa® 32-bit LX7 single-core processor, operating frequency up to 240 MHz, supports secondary development without using other microcontrollers or processors.
The ESP32-S3 is a low-power MCU-based system-on-chip (SoC) that supports 2.4 GHz Wi-Fi and Bluetooth® Low Energy (Bluetooth LE). It consists of high-performance dual-core microprocessor (Xtensa® 32-bit LX7), a low power coprocessor, a Wi-Fi baseband, a Bluetooth LE baseband, RF module, and peripherals, designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc.
- Onboard ESP-S3-12K module that comes with a PCB antenna
- Onboard CH340, USB to UART converter
- RGB 3-in-1 LED, convenient for secondary development
- USB port for power input, firmware programming, or UART debugging
- 2x21pin extension headers, breakout all the I/O pins of the module
- 2x keys, used as reset or user-defined
Features
- Complete Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps
- Support BLE5.0, Bluetooth mesh, rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps
- Built-in ESP32-S3 chip, Xtensa® 32bit LX7 dualcore processor, support up to 240 MHz clock frequency, with 384KB ROM, 512KB SRAM, 16KB RTC SRAM
- Support UART/I2C/PWM/ADC/GPIO/SPI/I2S
- Integrate Wi-Fi MAC/BB/RF/PA/LNA//BLE
- Support multiple sleep modes, deep sleep current is less than 8uA
- Support STA/AP/STA+AP work mode and mix mode
- Smart Config (APP) / AirKiss (WeChat) one-click distribution network supporting Android and IOS
- Support serial local upgrade and remote firmware upgrade (FOTA)
- General AT command can be used quickly
- Support secondary development, integrated Windows, Linux development environment
- NodeMCU-ESP-S3-12K-Kit module will use the built-in 8MByte Flash by default
Specifications
- Dimensions: 60.80mm x 25.27mm
- Package: DIP-42 (2.54mm pitch standard pin header)
- Antenna: PCB antenna
- WiFi frequency range: 2400~2483.5MHz
- Bluetooth: BLE5.0 (traditional Bluetooth is not available)
- Operating temperature: -40℃ ~ 85 ℃
- Storage condition: -40 ℃ ~ 125 ℃, < 90%RH
- Power supply: supply voltage 5V, supply current > 500mA
- Serial port data rate: support 110 ~ 4608000 bps, 115200 bps by default
- WiFi security: WEP/WPA-PSK/WPA2-PSK
- SPI Flash: default 8MByte
- PSRAM: 8MByte PSRAM
Applications
The NodeMCU-ESP-S3-12K-Kit suit for IOT applications such as:
- Smart home
- Intelligent building
- Industrial automation
- Wearable devices
- IP camera
- Intelligent agriculture
Dimensions
Development Resources