x
Teklif İsteyiniz
Paylaş:
Fiyat Alarmı
WAVESHARE

SIM7670G LTE Cat-1/GNSS HAT

Ürün Kodu : LTE-WS26861
Yorumlar
2.759,94 TL + KDV
Stok Durumu:
Yok
Teklif İsteyiniz Stoklara düşünce haber ver
Not
:
Aynı Gün Kargo 15’e kadar aynı gün kargo
Worldwide Shipment
Next Day Shipment
Kampanya

{{CMP.TITLE}}

{{CMP.DESCRIPTION}}

  • Ürün Özellikleri
  • İade ve Teslimat
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Beni Ara
  • Ek
  • DESCRIPTION
     
    Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.
    Cat-1/GNSS HAT For Raspberry Pi, Based On SIM7670G Module, Global Multi-Band LTE 4G Cat-1 Support, GNSS Positioning, 3x USB 2.0 Extended Ports
    SIM7670G LTE Cat-1/GNSS HAT For Raspberry Pi

    Global Band LTE 4G Cat-1 Support, GNSS Positioning, 3x USB 2.0 Extended Ports

     
    Features At A Glance

    The SIM7670G LTE Cat-1/GNSS HAT is an LTE Cat-1 module, supports wireless communication modes including LTE-TDD, LTE-FDD, with up to 10Mbps downlink rate and 5Mbps uplink rate. Supports Windows/Linux operating systems and multiple network protocols. The module size is the same as SIM7000/SIM7070/A7670E series, and the AT commands are mostly compatible with SIM800 series. It is suitable for IoT applications like remote information processing, monitoring devices, industrial routers, remote diagnosis, satellite positioning, and so on.

    • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
    • Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL
    • Supports RNDIS, NDIS and ECM dial-up
    • Supports GPS, GLONASS, Galileo, BeiDou positioning
    • Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on
    • Extended 3x USB 2.0 Type-A ports for the host devices such as Raspberry Pi, Windows PC
    • Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards
    • SIM card slot, supports 1.8V/3V SIM card
    • 6x LED indicators, easy to monitor the module operating status and USB connecting status
    • Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
    Specifications
    COMMUNICATION PARAMETERS
    Frequency band LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66
    LTE-TDD：B34, B38, B39, B40, B41
    Data transmission ≤5Mbps(UL)
    ≤10Mbps(DL)
    GNSS GPS, GLONASS, Galileo, BeiDou
    OPERATING PARAMETERS
    Power supply 5V
    Logic level 3.3V
    Dimensions 85 × 56.7mm

    Standard Raspberry Pi 40PIN GPIO

    Compatible With Raspberry Pi Series Boards

    Connecting With Raspberry Pi 5

     

    Connecting With Raspberry Pi 4B

     

    Connecting With CM4 IO Base Board

    * for reference only, please refer to the Package Content for detailed part list


    Global Multi Band Support Of LTE Cat-1

    LTE Cat-1: Up To 5Mbps (Uplink) / Up To 10Mbps (Downlink)


    Dial-Up On Windows/Linux

    Supports Connecting To Windows PC, Raspberry Pi, Or Other Linux Industrial Devices Via USB Interface For LTE Cat-1 Networking And Extending USB Ports

    GNSS Positioning

    Supports GPS, GLONASS, Galileo, BeiDou Positioning


    What's On Board
    1. SIM7670G module
    2. Raspberry Pi 40PIN GPIO header
    3. DIP switches
      for switching to connect the UART and power ON/OFF control of the module to the Raspberry Pi GPIO;
      switches to BOOT for entering the burning mode
    4. USB Type-A interface
      for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports
    5. 3x USB extended ports
    6. PWRKEY
    7. USB Type-C port
      for connecting to USB port of the host such as Raspberry Pi for 4G communication, power supply, and extending USB ports
     
    1. GNSS IPEX 1 connector
    2. LED indicators
    3. LTE IPEX 1 connector
    4. Nano SIM card slot
    5. 4G UART pads
      compatible with Raspberry Pi 5 3PIN UART connector
    6. Reserved test pads
      for connecting with other host boards
    7. FE1.1S USB 2.0 HUB
      USB HUB chip

    Pinout Definition
    Application Example

    Provides Multiple Networking Demos With Waveshare.Cloud, Using The Lightweight MQTT Protocol To Achieve Data Visualization Service


    Waveshare.Cloud Support

    Provides Tutorial And Demo For Quick Start Of Smart IoT Solutions, With Large-Screen Data Visualization Display To Meet Various Application Scenarios

    Smart garden solutions:
    The SIM7670G LTE Cat-1/GNSS HAT can report various sensor data of the garden through MQTT to remotely control device ON/OFF, irrigation, fertilization, and so on.


    Server Performance Cloud Monitoring:
    The SIM7670G LTE Cat-1/GNSS HAT can report various performance parameters of the Raspberry Pi server through MQTT, and monitor the operation status in real-time through the cloud platform.


    IoT GPS Mobile Positioning:
    The SIM7670G LTE Cat-1/GNSS HAT can regularly report the data of the GPS positioning module through MQTT to realize mobile detection, animal or device positioning and tracking, etc.

    Outline Dimensions
Sepete Ekle
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.