USB To UART Board, Connector, High Baud Rate Transmission, (TYPE-A)
Ürün Kodu : LTE-WS21442
207,00 TL + KDV
Stok Durumu:
Var
(5 Adet)
Not
:
Aynı Gün Kargo
15’e kadar aynı gün kargo
Worldwide
Shipment
Next Day
Shipment
Kampanya
{{CMP.TITLE}}
{{CMP.DESCRIPTION}}
- Ürün Özellikleri
- İade ve Teslimat
- Ödeme Seçenekleri
- Yorumlar (0)
- Beni Ara
- Ek
-
Features At A Glance
- Adopts new version CH343G chip. Compared with CH340G, it supports higher data rate (up to 6Mbps) and more serial port IO levels (5V / 3.3V / 2.5V / 1.8V)
- Supports Mac, Linux, Android, Windows 7/8/8.1/10/11
- Onboard resettable Fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improve shock resistance, stable and safe communication performance
- Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance
- Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level
- Support 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly)
- Adopts double-sided black immersion gold process, which is durable and has a good look
SpecificationsHOST INTERFACE USB DEVICE INTERFACE UART COMMUNICATION RANGE 50bps ~ 6Mbps USB DEVICE INTERFACE connector: mini-USB, micro-USB, USB Type-A, USB Type-C;
protection: resettable Fuse, ESD protectionUART INTERFACE connector: 6pin right-angle pinheader;
protection: IO protection diodeMultiple Protection Circuit, Safe And StableOnboard Resettable Fuse And Transient Voltage Suppressor, Prevent Overcurrent And Overvoltage, Improve Shock Resistance; Onboard IO Protection Circuit, Anti Surge, Anti-Static, Stable And Safe Communication Performance
Multiple Systems SupportCompatible With Popular Systems Like Win7/8/8.1/10/11, Mac, Linux, Android...
Interface Introduction
INDICATOR DESCRIPTION PWR Power indicator, turn on when the voltage is detected from USB interface RXD Receiving indicator, turn on when data is sent back from the device interface TXD Sending indicator, turn on when data is sent from USB Pinouts Definition
VCC 5V or 3.3V output for external device (configured by jumper) GND Ground TXD Connects to MCU.RXD RXD Connects to MCU.TXD RTS# Connects to MCU.CTS CTS# Connects to MCU.RTS Different USB Connectors Are AvailablePlease Select The Proper One Before Placing Order
Outline Dimensions
